











휴대용 공기압 주입기 + 충전 솔루션 키트
In Stock
Estimated delivery:
Nov 26, 2026 - Dec 02, 2026
테슬라 타이어를 팽창시키는 솔루션. 이 충전 키트 & 에어 컴프레서—집이나 차에서 고효율 충전으로 완전히 충전된 상태를 유지하세요!
휴대용 공기압 주입기
테슬라용 휴대용 공기압 주입기
- 100W 고속 충전: 100W 고속 충전 공기압 주입기로 충전 경험을 혁신하세요. 포함된 USB-C 케이블로 단 30분 만에 완전 충전이 가능하며, 표준 모델보다 최대 6배 빠른 효율성을 제공합니다.
빠른 팽창, 최적의 성능
- 우리의 공기압 주입기로 팽창 성능이 50% 증가하는 경험을 해보세요. 이제 타이어를 평소보다 절반의 시간에 팽창시킬 수 있어 테슬라 소유자에게 효율성을 높여줍니다.
강력한 합금 주조 실린더
- 전기차(EV)에 맞춰 특별히 설계된 우리의 견고한 합금 주조 실린더는 높은 타이어 압력을 자신 있게 처리하여 신뢰성과 내구성을 보장합니다.
대형 화면 디스플레이
- 우리의 대형 화면 디자인은 모든 기능을 명확하게 표시하여 사용자 친화적인 조작 및 모니터링을 위한 직관적인 인터페이스를 제공합니다.
다양한 액세서리로 모든 필요를 충족합니다
- 이 종합 패키지에는 충격 방지 보관 케이스, 니들 밸브 어댑터, 프레스타 밸브 어댑터, Type-C 케이블이 포함되어 있어 어떤 상황에도 대비할 수 있습니다.
⚠️ 안전 주의사항:
- 공기 주입 중에는 고압 작동으로 인해 공기 호스가 뜨거워질 수 있습니다. 화상을 입지 않도록 주의해서 다루세요.
- 5분 이상 연속 작동을 피하여 과열을 방지하세요. 에어 컴프레서와 호스가 식은 후에 다루세요.
타이어 밸브 캡 (4개 세트)
- 밀폐 누출 방지: 저희 캡은 통합 고무 씰을 특징으로 하여 밀폐되고 누출 방지 및 방진 보호를 제공합니다.
- 복합 재료, 밸브 본체 보호: 내장된 절연 재료가 먼지, 부식 및 악천후로부터 밸브를 보호합니다.
- 내구성과 방진을 위한 고품질 재료: 아연 합금으로 제작된 이 캡은 뛰어난 강도와 방진 내구성을 제공합니다.
- 손쉬운 취급 및 설치: 육각형 디자인으로 설치 및 제거가 용이하여 사용자 친화적이고 실용적입니다.
165W 차량용 충전기
PD3.1 고속 충전
최신 PD3.1 고속 충전 프로토콜을 갖춘 USB-C 포트는 최대 140W의 전력을 제공하여, 차량에서 고출력 기기를 빠르게 충전하기에 완벽합니다.
트리플 포트 출력, 총 165W 전력
PD3.1 + PD3.0 + QC3.0 고속 충전을 지원하며 총 출력은 최대 165W입니다. 노트북, 태블릿, 스마트폰을 동시에 빠르고 효율적으로 충전하세요.
테슬라의 15.5V 전력 시스템에 최적화
테슬라의 15.5V 고전압 시스템에 맞춰 설계되어 안정적이고 높은 출력의 충전을 최대 안전성으로 보장합니다.
AI 노트북 세대를 위한 설계
PD3.1 초고속 충전으로 AI 준비된 노트북의 잠재력을 최대한 활용하세요. 고성능 컴퓨팅 작업 중에도 항상 전원을 유지하세요.
고급 안전 보호
여러 겹의 보호 장치가 과전류, 과전압, 과열 및 과충전으로부터 기기를 안전하게 보호하여 매번 안심하고 플러그를 꽂을 수 있습니다.
사양
입력
DC 12V–24V
출력
USB-C 1 (PD3.1): 5V ⎓3A, 9V ⎓3A, 12V ⎓3A, 15V ⎓3A, 20V ⎓5A, 28V ⎓5A (최대 140W)
USB-C 2 (PD3.0): 5V ⎓3A, 9V ⎓3A, 12V ⎓2.5A (최대 30W)
USB-A (QC3.0): 5V ⎓3A, 9V ⎓3A, 12V ⎓2.5A (30W Max)
Total Output: 165W Max
포함된 패키지
- 휴대용 에어 컴프레서 x1
- 보관 가방 x1
- 니들 밸브 어댑터 x1
- 프레스타 밸브 어댑터 x1
- Type-C 케이블 x1
- 사용 설명서
- 165W 차량용 충전기 x1
- 타이어 밸브 캡 x4
자주 묻는 질문 확인하기
이 필수 테슬라 액세서리에 대해 더 알아보고, 더 효율적이고 편리한 운전 경험을 위한 첫걸음을 내딛으세요. 여기를 클릭하세요 > 테슬라용 휴대용 에어 컴프레서 FAQ.
옵션 선택












휴대용 공기압 주입기 + 충전 솔루션 키트
In Stock
Estimated delivery:
Nov 26, 2026 - Dec 02, 2026
All New Tire Inflating Experience
High-efficient Inflation │ Design for Evs
100W High-speed Charging
Support fast charging in just 30 minutes for a full charge. Save up to 6 times of the waiting time compare to others.
Fast Inflation & Optimum Performance
Enhanced inflation performance up to 50%, taking only half the time to inflate.
Alloy Die-cast Cylinder
No need to fear of high pressure loading with our powerful cylinder. Design for EV with high tire pressure requirements.
100W High-speed Charging │Powered up, ready to go!
・Built-in lithium-ion battery. No need for
external power source,
go completely wireless.
・Support up to 100W fast charging and 30 min to
full power.
Save up to 6 times of the waiting
time compare to others.
・Type-C universal charging port is highly
compatible and convenient.

Note: The Jowua air pump supports 5-20V/5A (100W Max) fast charging. The battery charging time is dynamically adjusted based on the efficiency of the power supply. All data on this page have been tested under specific conditions, actual use may differ due to varying environments.
Powerful Motor
Optimum Performance
Reduce Inflation Time In Half !
Adopt high-speed permanent magnet motor with a 22mm high-precision alloy die-cast cylinder. It takes less than a minute* to refill a high-pressure tire.

Note: The inflated item is a 235/40 R19 car tire, inflated from 38 to 42 psi pressure approximately 55s.
This data is tested under specific conditions, due to different environments, the actual use process may be slightly different.
During the inflation process, high pressure operation may cause physical heating. Please do not use it continuously for more
than 5 minutes, and wait until it has cooled down. Be cautious when removing the air hose to prevent burns!
Electric Vehicles VS Traditional Car Tire
The maximum pressure for regular tire is the minimum for EVs

Electric vehicles are heavier than traditional vehicles due to their batteries and reinforced body structure. EVs require relatively high tire pressure to bear the weight. Take most of the Tesla models as example, the required tire pressure standard is 42psi/2.9bar, which is much higher than the traditional tire standard of 36psi/2.5bar.
Tire Pressure Requirment

Traditional 36psi /2.5bar

EV 42psi / 2.9bar
Inflation Time Comparison (from 32 to 42 PSI)

・Regular portable air pumps cannot handle the high pressure loading of electric vehicles due to the small-diameter cylinder design. Excessive pressure loading results in reduced efficiency and serious power consumption.
・Jowua adopts a large-diameter alloy die-cast. It is specifically designed to meet the high tire-pressure requirement of electric vehicles.
Electric Vehicles Mode
42 PSI by default. Press to inflate and automatically stops when the pre-set pressure is reached.
Effective Heat Dissipation
Multi-blade fans and cooling vent design for better air circulation and heat dissipation.
30 cm Extended Air Hose
Extended nylon-braided air hose, easily inflate from multiple angles.
Built-in LED Light
Easy to use in the dark ,
and long press for emergency SOS flashing.
Shockproof Case
Comes with a variety of adapters and accessories to meet all your needs.
Quick Connect Valve Adapter
Press to lock, pull to open,
fast and easy. Eliminating the time of tightening the air valve.
Large Screen Display
Display all features at once. Easy to read and operate.

Jowua Shockproof Storage Case
Easily store it on the side of the rear trunk.


Comes with a variety of adapters and accessories to meet all your needs.
Presta valve adapter

Ventil Adapter Set

Type-C charging cable

Storage Case
Tire pressure is low and the compressor is dead.
Just 12 minutes and you're on your way
Charge in 7 mins|Pump in 5 mins

Leading the way and going above and beyond

*Please use 100W charging equipment.
*In order to maintain the best condition, if the pump has not been used for a long time, it will be charged at a slow trickle rate to protect the battery when it is recharged.














Tire Valve Caps (Set of 4)

Durable Material
Dust Resistance

Easy
Installaion

Set of 4
Supreme Quality|Selected Material
High-Quality
Materials for Durability
and Dust Resistance
Crafted from zinc alloy for exceptional
strength, dustproof durability.
Integrated Rubber Design
Rubber seal for airtight, leak-proof,
and dust-resistant performance.
Composite Protection
Built-in insulation materials safeguard
your valves from dirt, corrosion, and harsh weather conditions.
Installation Guide


Step 1
Uncrew the original car valve and clean the valve core
Step 2
Align the JOWUA tire valve
Dedicated Design
Perfectly Match with Tesla

Hexagonal Shape Design
Easy installation and convenient removal.
Always effortless and user-friendly.
Smart Dynamic Power Management
Powered by an intelligent control chip, the system dynamically allocates the Tesla cigarette lighter port’s output based on the power needs of connected devices — ensuring optimized and efficient charging across all outputs.


High-Efficiency Car Charger Tailored for Tesla
Better suited for high-power devices than traditional 12V outlets.

