

























Model X 개별 선쉐이드 번들
Model X에 맞춤 제작된 선쉐이드로 궁극의 편안함과 보호를 경험하세요!
유리 지붕 전용 선쉐이드
Model X 전용 디자인
정밀하게 설계되어 앞 선루프와 팔콘 윙 도어에 완벽하게 맞으며, 향상된 열 차단 기능으로 더 시원하고 편안한 주행을 제공합니다.
2피스 앞 선루프 디자인
듀얼 패널 디자인으로 처짐을 방지하고 틈새 없이 매끄러운 커버리지를 제공하여 지붕 전체에 최대한의 보호를 보장합니다.
앞좌석 논쟁은 이제 그만!
앞 선루프는 듀얼 패널 디자인으로 운전자와 앞좌석 승객 모두 선쉐이드를 설치할지 자유롭게 선택할 수 있습니다.햇빛을 만끽하며 넓은 파노라마 뷰를 즐기거나 열과 자외선을 차단하고 싶을 때, 언제든지 쉽게 조절하여 취향에 맞출 수 있습니다!
고밀도 경량 패브릭
첨단 고밀도 직조 기술로 제작된 이 패브릭은 뛰어난 내열성을 제공하며, 열 전달을 줄이고 냄새가 없습니다. 자외선과 직사광선을 효과적으로 차단하여 실내를 더 시원하고 쾌적하게 유지합니다.
특허받은 클립 설치 방식
슬림하고 컴팩트하며 설치가 용이한 클립은 차량 내부와 완벽하게 조화를 이룹니다. 선쉐이드는 빠른 해제 디자인을 특징으로 하여 클립을 분리하지 않고도 손쉽게 설치 및 제거할 수 있습니다.
진공 흡착 컵 포함
진공 흡착 컵으로 앞 선루프에 단단하고 완벽하게 부착되어 안정적인 장착을 보장합니다.디자인은 눈에 띄지 않고, 방해되지 않으며, 창문 틴트의 무결성을 유지하면서 내부를 보호합니다. 설치는 간단히 눌러주고, 제거는 부드럽게 당기면 됩니다—설치에는 단 1초가 걸립니다.
접이식 및 휴대 가능
메모리 메탈 프레임으로 제작된 선쉐이드는 즉시 컴팩트한 "나비" 모양으로 접을 수 있습니다. 전용 보관 가방이 함께 제공되어, 후방 트렁크 하단 수납 공간에 쉽게 보관할 수 있습니다.
후방 리프트 게이트 + 삼각형 창문 선쉐이드
모델 X 맞춤형
모델 X 전용으로 설계된 선쉐이드로 궁극의 편안함과 보호를 경험하세요. 후방 게이트에 완벽하게 맞아 단열성을 높이고 고급스러운 느낌을 보장합니다.
고밀도 투명 직물
독특한 고밀도 투명 직물로 제작된 우리의 선쉐이드는 시야를 유지하면서도 효과적으로 햇빛을 차단합니다. 이 내열성, 무취의 소재는 열 전도를 크게 줄여 실내를 쾌적하게 유지합니다.
간편한 보관이 가능한 접이식 디자인
메모리 메탈 프레임이 특징인 우리의 선쉐이드는 편리하게 타원형으로 접을 수 있습니다. 전용 보관 가방이 함께 제공되어 후방 수하물 칸의 하단층에 깔끔하게 보관할 수 있어 보관이 매우 간편합니다.
설치/보관
글라스 루프 선쉐이드
설치
-
포함된 프라이 도구를 사용하여 내부 트림과 유리창 사이에 작은 틈을 만들어 클립을 설치하세요.
-
뒷 유리 지붕 선쉐이드와 함께 4개의 클립을 권장 위치에 설치하세요.
-
전면 유리창에 부착되도록 흡착컵을 위로 부드럽게 눌러주세요.
-
설치 위치와 적합성을 확인하면 설치가 완료됩니다.
*팔콘 윙 도어의 경우 클립이 필요하지 않습니다. 선쉐이드를 팔콘 윙 도어의 모양에 맞춰 내부 트림 사이에 직접 삽입하세요.
보관
-
선쉐이드를 "나비" 모양으로 접으세요.
-
포함된 보관 가방에 선쉐이드를 보관하세요. 이는 후방 트렁크의 하단 보관 공간에 놓을 수 있으며, 선택적으로
Jowua 트렁크 매트와 함께 사용할 수 있습니다.
후면 리프트 게이트 + 삼각형 창 선쉐이드
설치
- 태그가 왼쪽 상단에 위치하도록 하세요. "SIDE UP" 아이콘이 위를 향하도록 합니다 (후면 리프트 게이트 쪽). "
JOWUA " 로고가 차량 내부를 향하도록 합니다. - 선쉐이드를 내부 트림과 후면 리프트 게이트의 틈을 따라 삽입하세요.
삼각형 창 선쉐이드를 내부 트림의 틈을 따라 삽입하세요.
보관
- 선쉐이드를 "타원형" 모양으로 접으세요.
- 선쉐이드를 파우치에 넣고
Jowua 후면 웰 라이너와 함께 하단 트렁크 수납 공간에 보관하세요.
제품 내용물
유리 지붕 선쉐이드-메쉬
-
앞 (왼쪽) 유리 지붕 선쉐이드 x1
-
앞 (오른쪽) 유리 지붕 선쉐이드 x1
-
뒤 유리 지붕 선쉐이드 x2
-
선쉐이드 클립 x4
-
프라이 도구 x1
-
지퍼형 보관 가방 x1
후면 리프트 게이트 + 삼각형 창문 선쉐이드
- 후면 리프트 게이트 선쉐이드 x1
- 삼각형 창문 선쉐이드 x2
- 지퍼형 보관 가방 x1

옵션 선택


























Let customers speak for us
from 403 reviews
Solid and good gear for my MY!

Efficace. Je n'ai pas mis les clips qui, de mon point de vue, ne sont pas indispensables. Le pliage est par contre peu évident à reproduire.

Remplit parfaitement sa fonction. Système d'accroche velcro efficace.

If you don’t have a portable air compressor and go to the gas station for air every month or less, you’re wasting your time. Just get this product! Super easy to use, easy to charge and takes less than 5 minutes. Wish I got one earlier!

Worth every penny!

Ordered, shipped, at my house within a week...perfect product. Well done

Muy cómodos y se ajustan perfectamente.

Very good and perfect

Although this is a bit expensive, it is worth it. The cell phone and device charging speed it amazing and matches the values listed in the product details. I haven't charged my laptop which needs 100W power yet, but I am sure it will work well.

This is a nice unit and performs as advertised. The best part is that it doesn't rattle and hides almost completely out of site when closed. I'm very satisfied with the purchase.

Exactly same as the original color

Fits perfectly and folds neatly.

The product quality is amazing, and I’m really happy with Jowua’s service.
I loved how carefully they replied to my emails and how easy the refund process was.
Their customer service feels very reliable, and since the product was great, I didn’t end up returning it.

싸구려같지 않고 고급스러워요
마이크랑 저장usb 동시에 연결하려고 샀어요

I was honestly surprised an adapter like this could support such an amazing charge rate. It was able to fully charge my daughter‘s notbook in record time!

Separate Sunshade
Full Vehicle Range Model X

Quick Cooling

Blocks Direct Sunlight

Two-Piece Front Window Design

Exclusive Hook Design

Vacuum Suction Cup Design

Easily
Foldable

Includes Storage Bag
Two-Piece Front Sunroof Design
Perfect Coverage, Enhanced Heat Insulation Effect

Custom-Made for Model X, Perfect Fit Does Not Block Interior Camera
Does Not Collapse Easily, Perfectly Covers the Roof
Seamless Left and Right Pieces, Precise with No Gaps
Say goodbye to disagreements between the driver and passenger!
Two-Piece Separate Design, Easily Adjustable to Your Mood

Driver's Side Not Installed
Perfect to enjoy the warmth of the sun and the wide driving view!
Passenger’s Side Installed
Don’t want to sunbathe or get tanned!Effectively blocks UV rays.
Premium High-Density Light-Transmitting Fabric
Light Transmission | UV Resistance & Heat Insulation | Reduces Heat Conduction

Before Installation
Strong sunlight directly shining, unable to effectively block UV rays. The interior temperature rises faster.

After Installation
Light transmission, does not affect sunroof visibility. Noticeable heat resistance, blocks direct sunlight.

Does Not Block Driving Visibility
Does not obstruct the view of traffic light signals | Wide view for front-seat passengers to enjoy the scenery.
Vacuum Suction Cup Design | Stable and Precise Installation
Simply press and pull for quick installation in seconds.

Vacuum Suction Cup
Firmly adheres to the front sunroof roof without affecting the use of the sunshade.


Compact Handle
Convenient for assembly and disassembly, seamlessly blends into the interior design.
Patented Clips Design | Easily Secures with Effortless Installation


Quick-Release Sunshade Design, No Need to Remove the Clips
After removing the sunshade, you can leave the clips on the sunroof frame, allowing you to reinstall the sunshade in just a few seconds next time!
Custom-Made for Model X, Perfect Fit


Front Windshield Roof Sunshades

Left and Right Falcon Wing Doors Sunshades

Easy to Fold
Crafted with a memory metal frame,it effortlessly folds into a butterfly shape.

Compact and Easy to Store
When temporarily removing the sunshade, it can be quickly stored under the seat.

Includes a Storage Bag
Use the Jowua specially designed storage bag, place it in the lower compartment of the trunk for perfect storage.
How to Install

Step 1
Use the included pry tool to create a small gap between the interior panel and the glass window, then install the clips.

Step 2
Install the 4 clips and rear window sunshade in the recommended position. You can also raise the car’s original sunshade to further reinforce the fixation.

Step 3
Gently press the 4 vacuum suction cups upward to fix them to the windshield.

Step 4
Check the installation position and seal tightness. Congrats the installation is complete.
Glass Roof Sunshade
Design for 2021+ Model X
Heat-ray Shielding|UV Protection|Easy and Fast Installation|Light-transmitting

Special Anti-light Silver Coating

Sunshade Cooling

99% UV Protection

Exclusive Clip Design

Quick Storage

Storage Pouch Included
Double Side & High Density Mesh Fabric
99% UV Protection,UPF 50+ Blocking over 99% of the UV radiation.

Outer Layer
( face glass roof )

Inner Layer
( face cabin )
。Special Anti-light Silver Coating
。High Density Woven Mesh
。UPF 50+,Blocking over 99%
of the
UV radiation.
。Heat-ray Shielding and UV Protection
Heat-ray Shielding & Cooling
Raised Temperature Comparison
Strong Light Exposure (after 30 minutes)
Car Cabin -14.6°C Lower
Jowua Dark Matter VS No Sunshade
Up to 3.2 Times Cooling Effect
Jowua Dark Matter VS Other Brands
Perfect Fit
Fit Precisely|Seamless Integration

Front Glass Roof

Falcon Wing Doors
Raised Temperature Comparison
Strong Light Exposure (After 30 Minutes)


* The above data are all tested and certified by SGS International Laboratory
Exclusive Clip Design Fast and Easy Installation
One-Time Installation
Keep the clips on the trim after removing the sunshade. Next time you can place the sunshade back just in a few seconds.
Easy a Folding
With the memory metal frame,the sunshade
can be folded
into a “reversed heart”shape
instantly.
Exclusive Pouch
& Easy Storage
Store it in the lower trunk compartment with
Jowua tailored to size storage bag. Easy storageand
saving up space.
Pouch size smaller than other’s 30%
Installation

Step 1
Use the pry bar to open a small gap between the
interior trim and glass roof.
Install the sunshade clips into the gap.

Step 2
Install all 4 clips to our suggested location. Pull up the sunshade of Tesla to reinforce the front side.

Step 3
Make sure the tag locates at the upper-left.
“ SIDE UP ” icon is facing up (glass roof ).
“ JOWUA ” logo is facing car interior.

Step 4
Install the sunshade frame to all the clips.










Fast & Free delivery worldwide
Free delivery on orders over USD$120.
Orders are shipped within the next 2 days.
Satisfied or refunded
Satisfaction first! Return or exchange your Jowua purchase within 30 days.
Multi-Lingual Support
Support available through our WhatsApp chat or via email.
Secure payments
Certificate (SSL, AES-256, and PayPal). Your information is secure.