100W przenośny kompresor powietrza do Tesli
Przenośny Kompresor Powietrza do Tesli
- 100W Szybkie Ładowanie: Zrewolucjonizuj swoje doświadczenie ładowania dzięki naszemu 100W szybkiemu kompresorowi powietrza. Osiągnij pełne naładowanie w zaledwie 30 minut dzięki dołączonemu kablowi USB-C, oferując wydajność do sześciu razy szybszą niż standardowe modele.
Szybkie Pompowanie, Optymalna Wydajność
- Doświadcz 50% wzrostu wydajności pompowania z naszym kompresorem. Teraz możesz napompować opony w połowie zwykłego czasu, zwiększając efektywność dla właścicieli Tesli.
Mocny Cylinder z Odlewu Stopowego
- Dostosowany specjalnie do pojazdów elektrycznych (EV), nasz solidny cylinder z odlewu stopowego pewnie radzi sobie z wysokimi ciśnieniami w oponach, zapewniając niezawodność i trwałość.
Duży Wyświetlacz
- Nasz projekt z dużym ekranem zapewnia intuicyjny interfejs, wyraźnie wyświetlając wszystkie funkcje dla łatwej obsługi i monitorowania.
Wiele Akcesoriów, Aby Spełnić Wszystkie Ynasze Potrzeby
- Ten kompleksowy zestaw zawiera wstrząsoodporne etui, adapter zaworu igłowego, adapter zaworu Presta i kabel Type-C, zapewniając gotowość na każdą sytuację.
⚠️ Uwagi Bezpieczeństwa:
- Podczas pompowania wąż powietrzny może się nagrzewać z powodu pracy pod wysokim ciśnieniem. Obsługuj ostrożnie, aby uniknąć poparzeń.
- Unikaj ciągłej pracy przez ponad 5 minut, aby zapobiec przegrzaniu. Upewnij się, że kompresor powietrza i wąż ostygły przed obsługą.
Zawartość opakowania
- Przenośny kompresor powietrza x1
- Torba do przechowywania x1
- Adapter zaworu igłowego x1
- Adapter zaworu Presta x1
- Kabel Type-C x1
- Instrukcja obsługi
Sprawdź FAQ: Dowiedz się więcej o tym niezbędnym akcesorium do Tesli i zrób pierwszy krok w kierunku bardziej efektywnej i wygodnej jazdy. Kliknij tutaj > Przenośny kompresor powietrza do Tesli FAQ.
Wybierz opcje
100W przenośny kompresor powietrza do Tesli
All New Tire Inflating Experience
High-efficient Inflation │ Design for Evs
60W High-speed Charging
Support fast charging in just 30 minutes for a full charge. Save up to 6 times of the waiting time compare to others.
Fast Inflation & Optimum Performance
Enhanced inflation performance up to 50%, taking only half the time to inflate.
Alloy Die-cast Cylinder
No need to fear of high pressure loading with our powerful cylinder. Design for EV with high tire pressure requirements.
Fast Charge Fast Inflation Powerful Cylinder
60W High-speed Charging │Powered up, ready to go!
・Built-in lithium-ion battery. No need for
external power source,
go completely wireless.
・Support up to 60W fast charging and 30 min to
full power.
Save up to 6 times of the waiting
time compare to others.
・Type-C universal charging port is highly
compatible and convenient.
Note: The Jowua air pump supports 5-20V⎓3A (maximum 60W) fast charging. The battery charging time is dynamically adjusted based on the efficiency of the power supply. All data on this page have been tested under specific conditions, actual use may differ due to varying environments.
Powerful Motor
Optimum Performance
Reduce Inflation Time In Half !
Adopt high-speed permanent magnet motor with a 22mm high-precision alloy die-cast cylinder. It takes less than a minute* to refill a high-pressure tire.
Note: The inflated item is a 235/40 R19 car tire, inflated from 38 to 42 psi pressure approximately 55s.
This data is tested under specific conditions, due to different environments, the actual use process may be slightly different.
During the inflation process, high pressure operation may cause physical heating. Please do not use it continuously for more
than 5 minutes, and wait until it has cooled down. Be cautious when removing the air hose to prevent burns!
Electric Vehicles VS Traditional Car Tire
The maximum pressure for regular tire is the minimum for EVs
Electric vehicles are heavier than traditional vehicles due to their batteries and reinforced body structure. EVs require relatively high tire pressure to bear the weight. Take most of the Tesla models as example, the required tire pressure standard is 42psi/2.9bar, which is much higher than the traditional tire standard of 36psi/2.5bar.
Tire Pressure Requirment
Traditional 36psi /2.5bar
EV 42psi / 2.9bar
Inflation Time Comparison (from 32 to 42 PSI)
・Regular portable air pumps cannot handle the high pressure loading of electric vehicles due to the small-diameter cylinder design. Excessive pressure loading results in reduced efficiency and serious power consumption.
・Jowua adopts a large-diameter alloy die-cast. It is specifically designed to meet the high tire-pressure requirement of electric vehicles.
Electric Vehicles Mode
42 PSI by default. Press to inflate and automatically stops when the pre-set pressure is reached.
Effective Heat Dissipation
Multi-blade fans and cooling vent design for better air circulation and heat dissipation.
30 cm Extended Air Hose
Extended nylon-braided air hose, easily inflate from multiple angles.
Built-in LED Light
Easy to use in the dark ,
and long press for emergency SOS flashing.
Shockproof Case
Comes with a variety of adapters and accessories to meet all your needs.
Quick Connect Valve Adapter
Press to lock, pull to open,
fast and easy. Eliminating the time of tightening the air valve.
Large Screen Display
Display all features at once. Easy to read and operate.
Jowua Shockproof Storage Case
Easily store it on the side of the rear trunk.
Comes with a variety of adapters and accessories to meet all your needs.
Presta valve adapter
Ventil Adapter Set
Type-C charging cable
Storage Case
Low Tire Pressure?
Out of Battery Again?
Support Fast Charge & Quick Inflation Helps you get back on the road faster than ever.
Power up in a hurry
12 minutes 60W fast charging
Super-fast Inflation
Fully inflate all four tires from
38 to 42 psi within 6 minutes.
Note: This data is tested under specific conditions, due todifferent environments, the actual use process may beslightly different.
Note: During the inflation process, high pressure operationmay cause physical heating. Please do not use it continuouslyfor more than 5 minutes, and wait until it has cooled down.Be cautious when removing the air hose to prevent burns!
獨家設計 專為Model 3 & Y 量身打造
有兩種不同的頭枕造型
Model 3
頭枕上有兩縫線
Model Y
頭枕表面無縫線
Tire Valve Caps (Set of 4)
Durable Material
Dust Resistance
Easy
Installaion
Set of 4
Supreme Quality｜Selected Material
High-Quality
Materials for Durability
and Dust Resistance
Crafted from zinc alloy for exceptional
strength, dustproof durability.
Integrated Rubber Design
Rubber seal for airtight, leak-proof,
and dust-resistant performance.
Composite Protection
Built-in insulation materials safeguard
your valves from dirt, corrosion, and harsh weather conditions.
Installation Guide
Step 1
Uncrew the original car valve and clean the valve core
Step 2
Align the JOWUA tire valve
Notice
Due to the built-in rubber of the valve caps, it's advised not to over-tighten during locking to avoid complications. And caused by weather-induced expansion and contraction of the valve.
Dedicated Design
Perfectly Match with Tesla
Hexagonal Shape Design
Easy installation and convenient removal.
Always effortless and user-friendly.
Let customers speak for us
This glass roof sunshade works and looks great. I don’t even notice it above me. I park outside a lot and it has made a noticeable improvement in the overall comfort in my model 3.
finally don’t have to keep reformatting thumb drive because of using the outlet under the center armrest
So far so good, the case is very high quality
Nice looking valve capa like everything Jowua does
Comfortable!!
Great model y Juniper accessories
Loved it easy install great quality
Before, my Tesla phone charger sat unused 99% of the time. Now, thanks to this small device, it has a permanent spot in my car—always handy and incredibly convenient.
Works as advertised
Everything was easy to install and very form-fitting! I will be buying from Jowua again.
I spent a lot of time watching reviews from different manufacturers. Very happy with Jowua floor matts. Perfect fit, high quality - highly recommend
Amazing quality
Super pratique pour tout. Pas seulement l'auto mais en vélo de montagne ou pour gonfler un ballon.
I love the simplicity of this device and the design it works great and I highly recommend.
Excellent quality, very well designed, attention to details, good material. More practical then the original Tesla.